Traeger Part – Hot Rod and Flame Sensor Assembly – 220V

Description

• Function: Ignites wood pellets and senses the flame.
• Compatibility: Fits newer D2/WiFIRE models like Ironwood, Timberline, Pro 575/780 (check model specifics).
• Voltage: Often the 220V/230V version for international models or specific setups.
• Includes: Usually the hot rod, flame sensor, and sometimes the firepot assembly, depending on the specific kit. 

• Ignition Failure (ER07): The grill won’t light.
• Flame Sensor Error (0024): The grill loses flame or can’t detect it. 

1. Power Off & Unplug: Always disconnect power first.
2. Access Firepot: Remove grates, drip tray, heat shield, and vacuum ash.
3. Remove Old: Loosen set screw, pull out the old hot rod from the firepot.
4. Install New: Connect the new unit, often taping wires to guide them, and secure it.
5. Check Firepot: Ensure the firepot is seated correctly and clean.